Introduction
Solar Parking Structures is generally based on concrete piers. Considering the actual function of parking vehicles, the design of the longitudinal beams and guide rails of the carport brackets is relatively thick, the span (5000mm) is usually relatively large, and the height from the ground is relatively high, and this bracket also With waterproof function, generally other ground brackets do not have this function.
Technical Information
| Installation site | Outside |
| Max wind speed | Up to 42m/s |
| Max snow load | Up to 1.4KN/m² |
| Installation angle | 5°-15° |
| Span(E-W) | 5000mm |
| Standard ground clearance | 2500mm |
| Panel array | Landscape |
| Rows | 2004-5-6 |
| Material | Aluminum(AL6005-T5) |
| Warranty | 10 years |
About Us
We are a innovation-driven company, we have five patents and another 13 patents will be expected to get in short months.
we are willing to develop all new material only if it’s required in application.
Advantage technology in composition control, especially super low carton steel, stainless steel and duplex stainless steel.
We cast very good surface of thin-wall castings, which is normally not easy to control for sand castings, but we made suitable technology and are able to guarantee smooth no-defect surface.
Crack is fatal flaw for pressure resistant container. We can make sure no crack inside and outside of the pump and valve castings, and a good pressure-resistant performance.
All our technology innovation only for one aim--- the best quality, even that means a higher cost and lower production rate.
Hot Tags: solar parking structures, suppliers China, manufacturers, factory, customized, buy, price, pricelist, quotation, free sample